Select Page

Pair of LED 6×4 trailer lights with wire harness

$85.80 GST

Description

LED COMBINATION LAMP TRAILER KIT 6X4
ROADVISION: BR207K6X4
Input Voltage: 12V DC
Lamp Functions: Stop/Tail/Indicator/Reflector
Number of LED’s: Indicator- 6 LED’s, Stop/Tail- 6 LED’s, Licence- 6 LED’s
Current Draw Amps: Ind – 0.09A, S/T – 0.09/0.02A, Lic 0.05A @ 13.8V
Housing Construction: Polycarbonate
Lens Construction: Polycarbonate
Mounting Depth: Surface Mount
Mounting Hole/Cut Out: EL207P – 100mm Stud Centres, EL25BP – 45mm Centres
Cable Length: LEDLink Harness System Suit 6X4 Trailers
IP Rating: Submersible
Warranty: 5 Years
Approvals: Ind – E4-6R-0115611, S/T – E4-7R-0215611,
Ref – E4-3R-0215611, Lic – CRN 46101
Dimensions: EL207P – 150 x 80 x 23mm, EL25BP – 81 x 41 x 34mm

FEATURES:
• 12V input & low current draw
• ‚‚Polycarbonate housing & lens
• ‚‚Easy to install complete DIY plug & play kits
• ‚‚Suitable for the average home handyman
• ‚‚No crimping, soldering or joining of wires
• ‚‚Twist lock plugs provide secure connection
• ‚‚Waterproof with internal O-ring seals
• ‚‚Eliminates harness corrosion from moisture
• ‚‚Suitable for 6×4 trailers
• ‚‚7 Pin flat & 7 pin round trailer plug options
• ‚‚ADR / ECE approved
• ‚‚5 Year warranty
Our ROADVISION simple DIY trailer lighting kit designed for the budget conscious consumer, delivering the durability of maintenance free LED technology and greater visibility providing increased safety. Roadvision’s BR208 Series combination lamps produce more light output than incandescent lamps whilst drawing a fraction of the current. Constructed with durable polycarbonate lenses and housings, these lamps are dust & water proof and totally maintenance free with a lifespan rated at 100,000hrs. Fitment is also made easy with integrated twin mounting studs and stainless steel hardware. With ROADVISION it’s FIT & FORGET.
BR207K6X4 LED COMBINATION LAMP TRAILER KIT 207 6X4
12V STOP/TAIL/IND/REF/LIC RECT 150 x 80mm + BR25B + 7TPF + 7TPR 6X4 TRAILER KIT WITH LEDLink HARNESS
LEDLink Wiring Kits for 6×4 Trailers – Using Roadvision’s new LEDLink™ plug and play system, our trailer wiring kits are a complete DIY solution eliminating the need for any cutting, soldering or joining of trailer wiring. Simply mount the lamps, push in and twist the waterproof LEDLink™ connectors, cable tie the harness to the chassis and you’re done. Complete with everything you need… Plug and play wiring harness, pair of rear combination lamps, licence plate lamp and both 7 pin flat or 7 pin large round trailer plugs. Roadvision LEDLink™ trailer kits are simple to install, deliver a perfect installation every time and protect the entire trailer lighting system from corrosion and water ingress. Installing trailer lamps has never been so easy!
EASY TO FIT…
• Easy to install complete DIY plug & play kits
• Suitable for the average home handyman
• Requires only basic tools for installation
• No crimping, soldering or joining of wires
• Twist lock plugs provide secure connection
• Waterproof with internal O-ring seals
• Eliminates harness corrosion from moisture ingress
• All components ADR approved
• Suitable for 6×4 trailers

Additional information

Weight 1.2 kg
Dimensions 40 × 33 × 10 cm